Quad 5.1 Home Theatre Package

Quad 5.1 Home Theatre Package

The Quad 5.1 home theatre package consists of:

QUAD 22L2 FLOORSTANDING SPEAKERS (PAIR)

The superb Quad 22L2s are a top-end floorstanding speaker. From the highly-rated Quad L series, they deliver a terrific and musical performance with sweet, high-quality treble and warm, full bass soundstaging. 

These loudspeakers produce exceptional results with the most challenging music genres, especially large scale orchestral and rock. They include removable front grilles, cotton gloves, floor stands and floor spikes.

Specifications:

• Power handling (watts): 150 watts
• Recommended amplifier power: 50-300 watts
• Sensitivity (dB): 89
• Nominal impedance (ohms): 6
• HF Drivers: 1" (25mm) soft-dome with Neodymium magnets and aluminium voice coil
• MF Drivers: 6.5" (170mm) woven Kevlar
• LF Drivers: 6.5" (170mm) woven Kevlar
• Frequency response (Hz): 30 28,000
• Upper frequency limit: 32,000
• Crossover frequency (kHz): 150Hz & 3kHz
• Weight (kg): 38.1 pair
• Dimensions (mm): 205W x 850H x 278D

QUAD L2 CENTRE SPEAKER (PIECE)

Quad L2 centre speaker is designed to match perfectly with other speakers in the L2 range in a home cinema set-up. The design incorporates the latest technology including an aluminium voice coil and low-reflection bass driver chassis. With superbly integrated drivers, the L2 centre is refined, with class-leading detail and imaging the perfect attributes for a quality centre speaker. Supplied with a removable front grille.

Specifications:

• Enclosure Type: 2 way reflex
• Bass Driver: 2 x 125mm
• Recommended Amplifier Power: 30 to 150 watts
• Crossover Frequency: 2.5kHz
• Frequency Response (at 3dB): 70Hz 28kHz
• Nominal impedance: 8 ohms (min 4 ohms)
• Sensitivity SPL m 2.83V: 88dB 
• Dimensions (mm): 428H x 163W x 206D

QUAD 9L2 REAR SPEAKERS (PAIR) + Wall Brackets (PAIR)

The Quad 9L2 Speaker is a follow-up to the original L-series it has been updated and improved in every respect whilst maintaining the same clear identity and level of refinement. Aluminum voice coils, a new profiled tweeter pod, improved chassis design for lower mid-range distortion and improved terminals, spikes and plinths. Set to become every bit as influential as its predecessor, the L2 series is once again redefining expectations in its class.

Specifications

• Type: Bookshelf
• Bass Driver: 100mm long-throw bass driver with die-cast chassis 
• Tweeter: 25mm dome tweeter
• Bi-wireable
• Dimensions (H x W x D)248 x 152 x 205mm

QUAD L-ITE SUBWOOFER (PIECE)

The L-ite subwoofer is a 5/6th scale of the multi award-winning L-sub subwoofer. A remarkable concatenation of technology, the L-ite subwoofer features not only one of the most advanced bass drivers ever conceived and a superb filter stage offering six discrete paths, but also a powerful 300W amplifier and full remote control operation.

The 'Tri-lam' cone uses a carbon fibre weave sandwiched between two layers of glass fibre, providing first class strength, but with the desiarble damping characteristics of the glass-fibre.

Each crossover frequency is a separate circuit, for the best possible retention of signal quality and can be switched via the remote control (supplied) for seamless integration into your room and system. 

Specifications

• Transducer Complement: Single Tri-lam driver
• Cone Bass Driver: 250mm / 10
• Amplifier Power Output: 300W RMS
• Line Input Sensitivity: 250mV for 100W output
• Input Impedance: 10K line input
• Frequency Response (Boundary): 25Hz to 95Hz
• Lower Limit (-10dB): 32Hz
• Avg max Output @1m: 113dB
• Crossover Range: 35 to 85Hz
• Enclosure type: Sealed
• Dimensions (H x W x D): 485 x 288 x 425mm

Warranty for the entire system is ONE YEAR!